Compaction Equipment Hire
Plate Compactor 90kg — Flextool FT201806
Hire the Flextool FT201806 90kg plate compactor from Flourish Hire for compacting granular bases, gravel, sand, road base, paver preparation, driveway toppings and general site compaction work. This petrol forward plate compactor is a practical choice when you need more weight and compaction force than a smaller plate compactor, while still keeping the machine suitable for accessible landscaping, building and site-prep jobs.
What You Get On Hire
The Flextool FT201806 is a heavier forward plate compactor suited to compacting flat, open areas where a firm base is needed before paving, concreting, landscaping or finishing work.
Key Features
- Petrol forward plate compactor for granular compaction work
- Heavier hire-class plate for stronger base preparation than small compactors
- Honda GX160 4-stroke petrol engine
- 460 x 610 mm plate size for good ground coverage
- External throttle control
- Foldover handle for easier handling and storage
- Central lifting hook and side lifting handles
- Heavy-duty handle mounts
- High-strength base plate with curved edges
- Suitable for trade and capable DIY use with proper care
Specifications
- Product: Flextool Forward Plate Compactor
- Client hire title: Plate Compactor 90kg — Flextool FT201806
- Official Flextool model: FCP-87B
- Product code: FT201806-UNIT
- Operating weight: 87 kg
- Plate size: 460 x 610 mm
- Engine: Honda GX160 4-stroke petrol
- Rated power: 5.5 hp
- Centrifugal force: 19.8 kN
- Vibration frequency: 7000 vpm
- Maximum travel speed: 26 m/min
- Water tank: not included as standard
- Wheel kit: not included as standard
Included With Hire
- Flextool FT201806 / FCP-87B forward plate compactor
- Petrol engine fitted to the unit
- Foldover handle
- Lifting point and side lifting handles fitted to the machine
- Basic hire handover information
- Manual or hire information where available
Fuel, site preparation, personal protective equipment and any extra job-specific items should be confirmed before booking.
Usage & Suitability
This plate compactor is suitable for:
- Road base compaction
- Gravel and sand base preparation
- Paver base preparation
- Driveway topping compaction
- Landscaping base work
- Shed pad and path preparation where access allows
- Trench backfill compaction in suitable granular material
- General earthworks and site preparation
- Brick paving preparation
- Road maintenance and repair support work
This forward plate compactor is best suited to granular materials such as gravel, sand and road base. For cohesive materials such as clay or silt, a vibrating rammer may be a better option, depending on the job.
Power/Fuel/Operation Notes
This is a petrol-powered plate compactor fitted with a Honda GX160 4-stroke engine. It is designed for outdoor compaction work in suitable site conditions.
Before hiring, check that your site has enough space to move the compactor safely, that the base material is suitable for a forward plate, and that you have a practical plan for loading, unloading or receiving delivery.
Transport & Delivery Notes
This unit has an operating weight of 87 kg, so transport should be planned properly. It is not a light one-person lift item.
Pickup may suit customers with a suitable vehicle, ramps or loading support, but delivery is often the easier option for this size of compactor. Flourish Hire can provide delivery and collection within 50 km where available, charged at $2.50 per km one-way from depot to site.
If delivery is used, make sure there is safe access for handover and that a site contact with ID is available.
Safety & Practical Notes
Use this machine only on suitable ground and material. Keep hands, feet and loose clothing clear of moving and vibrating parts, and do not operate the machine in unsafe, unstable or poorly ventilated areas.
Plan the work area before starting. Remove loose obstacles, check nearby services and edges, and avoid using the compactor where the ground, slope or access makes the work unsafe.
For clay-heavy or narrow trench work, ask us whether a rammer compactor is a better fit before booking.
Stronger Base Compaction For Open-Access Jobs
This Flextool 90kg plate compactor is a good choice when the job needs more compaction strength than a small plate, but still needs a walk-behind machine that can be moved around a landscaping or building site.
It is especially useful for preparing firm bases under pavers, paths, shed areas, driveway toppings and compacted road base. The wider 460 x 610 mm plate helps cover open sections efficiently, while the forward travel design suits straight runs, pads and general base preparation.
Choose this compactor when your material is mostly granular and the work area is reasonably open. Choose the smaller 48kg plate compactor when the job is lighter, tighter or easier to access. Choose a rammer compactor when you are working in narrow trenches or with more cohesive soil such as clay or silt.
Short Hire Notes
Minimum hire is 24 hours. Flourish Hire uses the same rates every day, including weekends and public holidays. Pickup and return are available during our normal hours, Monday to Sunday, 6:30 am to 6:00 pm, with no after-hours pickup or return.
A $200 bond applies per item and is released after return and inspection. Fuelled equipment should be returned full and reasonably clean.
FAQ Section
What is the Flextool FT201806 plate compactor used for?
It is used for compacting suitable granular materials such as road base, gravel and sand. Common jobs include paver base preparation, landscaping bases, driveway toppings, paths, shed pads and general site compaction.
Is this a 90kg plate compactor?
The hire title uses the 90kg class description, but the official Flextool operating weight is 87 kg. It is the heavier Flextool forward plate compactor listed under product code FT201806-UNIT.
Is this better than the 48kg plate compactor?
It depends on the job. This 87 kg Flextool compactor is better suited when you need more compaction force and a larger plate for open-access base work. The 48kg plate compactor may be easier for lighter work, tighter access areas or smaller DIY jobs.
Can I use this plate compactor on clay?
A forward plate compactor is not usually the best choice for cohesive soils such as clay or silt. For those materials, a rammer compactor may be more suitable. Share your soil type and job details with us before booking if you are unsure.
Can this compactor be used for paver base preparation?
Yes, it is suitable for compacting suitable granular paver base material. Make sure the area is prepared properly and that the material being compacted is appropriate for a forward plate compactor.
Does the machine come with a water tank?
No, the verified standard specification does not list a water tank with this unit. Do not assume a water kit is included. Ask before booking if your job needs compaction over bituminous material or a water-assisted setup.
Can I pick this compactor up myself?
Pickup may be possible if you have suitable transport and a safe loading plan. The machine weighs 87 kg, so it should not be treated like a small hand tool. Delivery may be the safer and easier choice for many customers.
Is delivery available?
Yes, delivery and collection may be available within 50 km of Flourish Hire’s depot area. Delivery is charged at $2.50 per km one-way from depot to site, subject to availability and access.
What should I prepare before hiring this plate compactor?
Have your job area cleared, base material ready, access checked and transport or delivery organised. You should also confirm whether your material is suitable for a forward plate compactor, especially if the site has clay-heavy soil or tight trench areas.
Do I need to clean it before returning?
Yes. Please return the compactor reasonably clean and free from heavy built-up dirt or debris. Fuelled equipment should be returned full unless confirmed otherwise during hire.
The heavier plate made sense for preparing a more solid base before finishing the area. It felt like the right step up from a small compactor for open ground.
Useful for road base and gravel prep where a smaller machine would have taken longer. The foldover handle also helped with handling and transport planning.
Good option for landscaping work where the base needed to be firm before paving. It suited the job because the area was open and the material was granular.
The hire handover helped confirm whether this was the right compactor for the site. For heavier ground work, it was helpful to have a stronger plate available.
Why Choose Flourish Hire For This Plate Compactor
Flourish Hire makes it easier to hire the right compaction equipment for your site, not just the closest-looking machine. This Flextool FT201806 is a stronger forward plate compactor for customers who need reliable base compaction across suitable granular materials.
We can help you compare this 90kg hire-class plate with the smaller 48kg plate compactor or a rammer compactor before you book. That matters because gravel, road base, sand, clay, trench work and paver preparation do not all need the same compaction tool.
Our local hire service supports jobs around Greenbank, Greenbank, Logan, Brisbane and nearby areas within our delivery range. We use Booqable for availability, booking and payment, and we can provide practical hire information at handover so you know what you are taking to site.
Phone Number
Mobile: 0455 494 558
E-Mail & Working Hours
dhillon@flourishhire.com.au
Monday - Sunday: 6:30 am – 6:00 pm
Address
122-128 Teviot Rd, Greenbank QLD 4124, AustraliaAll Equipment List
Use the equipment search on the website to find the plate compactor, choose your hire dates and times, add it to your cart, complete secure payment, and receive your booking confirmation by email.
Plan This Plate Compactor Hire
To check whether this Flextool plate compactor suits your job, share the material you need to compact, the site location, hire dates, access conditions, pickup or delivery preference, and whether the area is open, tight or trench-based. This helps us confirm availability and guide you toward the right compaction equipment before hire.